EASY MARKER EV

Markers

EASY MARKER EV

Information

The sand-jet marking machines allow to carry out a permanent mark on the glass in a very cost-effective way and that’s why such technique is best performing and definitely preferable to laser and ink printing. Our automatic marking equipment EASYMARKER EV has been designed to be used in a vertical production line and it’s suitable for serial production. The logo can be carried out in different positions and at different heights, thanks to the fact that the steel mask (in which the logo is engraved) can be rotated and the position of the gun head can be adjusted by the operator. Moreover, the gun head is oscillating, in order to ensure the coupling with every vertical glass working machinery available on the market (bevellers, double edging machines, washing machines, tempering lines etc.). All these features enable to carry out the logo also on the edge of the glass. The EASYMARKER EV is a marking device that allows to speed up the marking process providing high quality of engraving for a non-fading logo. The machine is also equipped with an integrated timer that allows to optimize the production time and preserves the steel mask from premature wear. The aspirator connected to the Easymarker EV, called FP101, is equipped with a built-in dust filter and a container for abrasive material.

Easymarker EV is equipped with a control panel with touch-screen keypad. The programming is extremely quick and easy thanks to the use of icons and graphic images. A software developed by Fratelli Pezza allows the head of the marking gun to detect the point of contact with the glass, automatically starting the marking process.

  • Company’s logo
  • Numbers
  • Security norms
  • Quality standards
  • Glass type (tempered, laminated, low-carbon glass, etc.)
  • Surface of the glass
  • Edge of the glass
  • All types of glass

EASY MARKER EV

A new era in glass marking

Usable in a vertical production line with other machinery

Perfect reproduction and positioning of the logo

Quick marking process

Machine dimension (l x p x h) : 1110 x 400 x 990 mm / 43,7” x 15,7” x 39”
Bin dimension (l x p x h): 450 x 450 x 850 mm / 17,7165” x 17,7165” x 33,4645"
Machine weight: 75 kg / 165 lb
Bin weight: 18 kg / 39 lb
Nr. Filter bags: 1
Nr. Marking guns: 1

Max. marking area: Ø 25

Consumption & technical data
Consumption of compressed air: 350 lt. / min.
Total electrical consumption: 1,3 kW
Line pressure: 6 bar / 87 psi
Size of the aspirator: 200 m3/h
Noise level: < 85 db (a) leq

Cookie settings

This site uses cookies, small text files downloaded to your device when you visit a page.
For more information read our privacy policy.

Accept